ADA or the American with Disabilities Act makes it mandatory for public settings to give access to people with special abilities. This access is given by creating ramps that make the movement of wheelchair and motorized vehicles easy. As a construction firm, when you have to install the ramps in the settings, you should have the basic information about the measurements of the ramps that you should take. Along with these, you also need to consider taking the help of tactile paving services.
Below are some of the things which you should know before you go on to install those ramps-
1. Level of the ramp
Considering the ramp level requirements can be a good thing to start with. The ADA has the specification that the public areas and settings which have a change in the elevation of the floor of one or one and a half-inch should have a ramp. The ramp which is present can be a regular or a curb ramp, i.e., and it should bring the area of the facility to a good level. You can go for ramps with truncated domes as they enhance the amount of friction that is present.
2. Width requirement
The second parameter of the ramp installation could be about the width of the ramp that should be required. As per the ADA guidelines, the width of the ramp installed in all public facilities should be at least 36 inches. Even in the case when there are some additions to the ramps like the handrails, the width of the ramp should not change and still meet the 36-inch requirement. Indentations are some of the other things which you should look at.
3. Height of the ramp
Moving further, you should know about the height requirements of the ramps and curb ramps. The rise and the height of the ramp mean the same thing here. As per the ADA requirements, the maximum height of the ramp should be 30 inches. In case when the rise or the height of the ramp exceeds 30 inches, then several small ramps should be added in between, which gives them evenly spread out height all across.
If you want to get a perfect and ADA approved ramp at your place, you to take the help of the tactile paving services.
Below are some of the things which you should know before you go on to install those ramps-
1. Level of the ramp
Considering the ramp level requirements can be a good thing to start with. The ADA has the specification that the public areas and settings which have a change in the elevation of the floor of one or one and a half-inch should have a ramp. The ramp which is present can be a regular or a curb ramp, i.e., and it should bring the area of the facility to a good level. You can go for ramps with truncated domes as they enhance the amount of friction that is present.
2. Width requirement
The second parameter of the ramp installation could be about the width of the ramp that should be required. As per the ADA guidelines, the width of the ramp installed in all public facilities should be at least 36 inches. Even in the case when there are some additions to the ramps like the handrails, the width of the ramp should not change and still meet the 36-inch requirement. Indentations are some of the other things which you should look at.
3. Height of the ramp
Moving further, you should know about the height requirements of the ramps and curb ramps. The rise and the height of the ramp mean the same thing here. As per the ADA requirements, the maximum height of the ramp should be 30 inches. In case when the rise or the height of the ramp exceeds 30 inches, then several small ramps should be added in between, which gives them evenly spread out height all across.
If you want to get a perfect and ADA approved ramp at your place, you to take the help of the tactile paving services.
