Friday, June 14, 2019

Few Notable Features Of Detectable Warning Surfaces

At the beginning of a new construction project or a retrofitting project, selecting a good-quality concrete detectable warning surface plays a crucial role. You need to make sure that your project is compliant with the current ADA (Americans with Disabilities Act) requirements. It was 1991 when ADA was implemented and there have been several changes after that. So, as someone who has a requirement for these warning surfaces, it is your responsibility to verify with the standard rules and comply with them.

Location Requirements

The ADA requires truncated dome pavers (detectable warning surfaces) to be installed on rail and transport platform edges, curb ramps, reflecting pools, and hazardous crosswalks and vehicle ways.

Size Requirements

The warning surfaces should consist of a series of tactile domes over a radial, square, or rectangular grid that goes well with the ADA set of rules. The concrete detectable warning surface must have a minimum of 24 inches in length in the direction of travel and the entire width needs to be extended on the surface where they are being installed.

Types Of Warning Surface Products

Cast-in-Place- This is well-suited for retrofitted and new constructed projects where fresh concrete is required. The warning surface is incorporated into a fresh concrete and remains in place once the concrete sets fully.

Cast-in-Place Replaceable- This type of a detectable warning surface is similar to cast-in-place warning surface products with an exception. The panels consist of two pieces so it is easier to replace and change them without having to remove the entire panel embedded into the concrete.

Surface Applied- This type of warning surface is also well suited for retrofitted, as well as new construction projects. The panels are placed over the top of existing concrete surfaces and can be installed in less than ten minutes.

Radius Systems- It has a curved structure and can be useful around corners and other curved areas where people might require a continuous warning surface. The panels can be applied over the surface or cast-in-place.

The features that you are looking for in warning surfaces must meet with the ADA requirements, so that you do not get penalized for any non-compliance situation. There are a bunch of online retailers who can help you get the best concrete detectable warning surfaces.